Category Archives: Terrain and Maps

News about Tabletop Gaming Terrain and maps for Miniature Gaming and Roleplaying Games

PuzzleLock Sewers & Undercity Terrain Available Now

June 30, 2019

Large RPG Cities, just like Rome or Paris, have sewer systems for the primary purpose of drainage–to keep their streets from flooding. The sewers channel storm water away from the city.

Whether your RPG campaign is set in Balder’s Gate, Calimport or Waterdeep in the Forgotten Realms; Beneath the sprawling streets of Ravnica, or in the underground canals of Sigil in the outer planes, your adventures are likely to take you into the Sewers and Undercity….

PuzzleLock Sewers and Undercity is a 3d printable terrain for 28mm tabletop RPGs. The tiles connect like a jigsaw puzzle–there is no need for clips or magnets, and the tiles require no supports for printing.

There are 23 .stl files in the set, each one exquisitely detailed to create an immersive environment. The modular design will allow you to create an endless labrinth of Sewers and Undercity.

Heroic Maps Release the Moonshine Tavern Day and Moonshine Tavern Night

Jan 27, 2019

Heroic Maps have released two new Heroic Maps Storeys, The Moonshine Tavern (Night) and The Moonshine Tavern (Day)

“Don’t ask no questions, dont get no lies” Perched above the coast, the Moonshine Tavern is perfectly placed for those who may wish to import certain goods without the authorities getting involved…

A set of printable battlemaps compatible with any RPG/Dungeon-Crawl game. Use as a standalone gameboard, or combine with any same-scale tileset.
Contents: A multiple level map consisting of a 5 storey smugglers tavern, spread across 5 30×30 battlemaps, each depicting a different level.
Sea-Level – A small cove at the foot of the cliffs, with high tide allowing boats to access the caves and smugger docks inside.
Cellar – tavern cellars, with secret doors leading to smuggler caves. Lots of secret areas.
Ground Floor – The ground level of the tavern, with plenty of room for customers.
Attic –  Bedrooms, landlord quarters, and meeting rooms for smugglers.
Roof – pitched tiled rooftops, dormers, multiple access points.
Also included are 300dpi full size jpgs, for poster printing or VTT.
Also included are Roll20 VTT ready files, sized at 72dpi and 140x140px per square (all less than 10mb)

Deep Cut Studio Releases New River and Road Strip Mats

Jan 10, 2019

New scenery available for wargames tables from Deep Cut Studios – stripes of roads and rivers!

That’s 6 feet of continuous terrain for your table, ready to go out of the box, printed on mousepad (neoprene) material, easy to cut and make any junctions, turns and layout you can imagine.

They have a Dirt Road, Cobblestone Road and River stripe available.

Dimensions: 9 cm in width, 183 cm (6 feet) in length
– The paint are soaked into the material and will never scratch or fade off
– Non slippery backing to keep the tiles on the table
– Instant tile flatness and smooth surface
– Easy to cut with snap-off blade or scissors to make any layout, turns and junctions

Sky of War Battle Mat Available Now from PWork Wargames

Dec 27, 2018

For all the players that need a wargaming tabletop to set spectacular and dramatic WW2 air conflicts, Pwork Wargames presents the new great game mat design Sky of War.

Prepare your air fighter squadrons to fierce aerial combats on the new gaming mat Sky of War by Pwork Wargames: take your planes off and lead them in the skies above the Channel, revive the glorious airfights of the Second World War! Clouds and shadows make this game mat extremely realistic and perfectly compatible with wargames like Blood Red Skies and Wings of Glory.

Like all the other products of the Battle Mats range of Pwork, this awesome new release is resistant, practical and easy to store: the best solutions to turn your tabletop into a real battlefield. Its high-detailed graphic grants a wonderful and great-looking setting for your favourite wargames.

Storeys: The Church of St Pixtus the Martyr Now Available from Heroic Maps

Nov 23, 2018

This small church, named after a famous saint, has been used for worship by generations of villagers. The graveyard is full of their ancestors, with the more noble members of the community buried in the crypt. The living fill the pews, worshipping in the simple but pleasant church.

Storeys: The Church of St Pixtus the Martyr is a printable battlemap compatible with any RPG/Dungeon-Crawl game. Use as a standalone game board, or combine with any same-scale tile set.

Contents: A set  of 20 x 30 maps depicting a traditional NW European church. The nave of the church has a pulpit, pews and font, with the chancel and apse housing a small altar. An additional nave has been built to the side, and this is home to a small chapel. A bell tower is accessed by stairs, and a ladder leads to the roof of the tower. A set of stairs lead below the church to the crypt

Loke Battlemats Releases the Big Book of Battlemats

Oct 11, 2018

Attention Adventurers!

The Big Book of Battle Mats is the award-winning set of fantasy mats to keep your party rolling through any and every random encounter.

58 wipe clean maps will lead you through dungeons, along winding marsh tracks, past suspicious looking lairs and even into throne rooms on your quest for danger, excitement and treasure. And very possibly a little bit of a fight. Designed to spark the imagination, as well as illustrate encounters using the handy grid format, the Big Book of Battle Mats offers endless flexibility. You can play each map page individually or use the lay flat format to play across the complimentary opposing pages as one larger version.

The Big Book of Battle Mats Features

  •  58 Wipe Clean pages of Battle Mats for RPG encounters
  • Wipe clean format – The Big Book is fully laminated
  • Wire Bound lay flat format
  • Linked designs on opposing pages so option to play on A3 map
  • Fantasy Themed
  • 1 inch grid throughout

Winner of the People’s Choice Award for Best Accessory at the UK Games Expo The Big Book is now available from all good retailers!

Heroic Maps Storeys: Down the Well Available Now

Oct 3, 2018

Heroic Maps releases Storeys: Down The Well.

Drybon Well is a well-known landmark. Sitting atop a small hillock, it has provided the nearby villages with fresh water for as long as anyone can remember. If only they knew what was really down there…

A set of printable battlemaps compatible with any RPG/Dungeon-Crawl game. Use as a standalone gameboard, or combine with any same-scale tileset.
Contents:
  • A multiple level map consisting of a 5  battlemaps, each depicting a different level beneath a well, linked by the well shaft that connects them vertically.
  • Surface- a 20×20 map depicting a small well on a hill in a peaceful countryside setting.
  • Caverns – a 10×10 map showing a fungus cavern beneath the surface
  • The Halls – a 10×15 map of a grand hall, the walls lined with statues of death
  • The Crypt – A 10×15 map of a small tomb complex
  • The Lower Levels – a 20×20 map depicting the pool of water the well draws from, sitting in the middle of an ancient ruined catacomb,
Also included are 300dpi full size jpgs, for poster printing or VTT.
Also included are Roll20 VTT ready files, sized at 72dpi and 140x140px per square (all less than 10mb)

Underground Sci Fi Terrain from Brigade Models

July 13, 2018

Brigade Models give us that sinking feeling with the release of some stellar sci-fi sunken/underground terrain models in 6mm!

The desert is a harsh environment, with the combination of sun, sand and wind making life difficult for anyone trying to eke out an existence among the dunes. Some colonists have tried to protect themselves from the climate by digging themselves into the terrain and building their houses, workshops underground. In some cases they’ve built above ground and then buried the structures under a layer of plascrete and sand, leaving just the doors and windows exposed, with a few vents and exhausts.

B300-701 – Large Buried Structure – £4.50
B300-702 – Small Buried House #1 – £2.00
B300-703 – Small Buried House #2 – £2.00

For want of a better name, we’ve called these ones Sunken Structures. They’re based around a courtyard sunk into the ground around 25 feet or so, with doors and tunnels leading off from the open central area. Windows and vents pierce the side walls and exhaust towers protrude above the surface. Access from ground level can be by simple stairs cut into the rock or elevators running up the side of the pits. Some are accessed through small entrance buildings on the surface above. One of the structures is an octagonal pit with a large workshop door off to one side, intended as a below-ground landing bay.

The models are one-piece resin castings. They’re all cast as simple square or rectangular pieces, and all are 25mm deep – the idea is for them to be modeled into a terrain baseboard or hill/mesa using 25mm thick insulation foam.

B300-704 – Sunken Structure #1 – £4.00
B300-705 – Sunken Structure #2 – £5.00
B300-706 – Sunken Structure #3- £5.00
B300-707 – Sunken Landing Pad- £5.00